Horizontal Machining

5 Axis
HU -5X Trunnion Series HU-T Table-on-Table Series HU-TS Tilt Spindle Series

4 Axis
HU Series HPX Series

Vertical Machining

5 Axis
Vertex-5X Series VL-5X Series

3~4 Axis
Vertex Series VU Series VL Series

Jig Borers

3 ~ 5 Axis Vertical

4 & 5 axis Horizontal

Jig Grinders

Thread Grinders




MITSUI SEIKI High Precision Center Model VL30-5X, with linear motors and drives, numerically controlled with standard equipment including Automatic Tool Changer and high production capability for drilling, boring, tapping & reaming. Integrated circuit logic, closed loop, with complete electrical equipment for operation on 3-phases 50/60Hz, 200/220 Volts AC.


Working Capacity
X axis longitudinal stroke (head traverse) 200 mm (7.9")
Y axis cross stroke (column traverse) 300 mm (11.8")
Z axis vertical stroke (spindle head) 200 mm (7.9")
A axis (tilt) 150º (+40º ~ -110º)
C axis (rotary) Infinite 360,000 positions
Distance from table top to spindle nose 100-300 mm (3.9"-11.8")
Distance from table surface to A axis centerline 50mm (1.97")
Distance from Z axis slide way to spindle center 250 mm (9.8")
Working surface 180mm (7.08") Ø
Maximum work piece swing 260 mm (10.25") Ø
Max permissible load on pallet 20 kg. (44 lb.)
Table surface 6 tee - slots on 12mm width.
Height from floor to table top 800mm (31.5")
Feed Rate (X, Y, Z and B axes)
Rapid traverse  
X , Y and Z axes 40,000 mm/min (1,575 ipm)
A axis (tilting) 36,000º /min (100 RPM)
C axis (rotary) 54,000º /min (150 RPM)
Cutting feed
X, Y and Z axes 0.1~ 40,000 mm/min (0.004 ~ 1,575 ipm)
A axis (tilting) 36,000º /min (100 RPM)
C axis (rotary) 54,000º /min (150 RPM)
Maximum Acceleration 9.8 m/sec2 (1 G)
Minimum Resolution
X, Y and Z axes 0.0001 mm (.0000039")
A and C axes 0.0001º
Minimum Command (all Axes)
X, Y and Z axes 0.001mm (0.000039")
Linear scale feedback system
(Precision glass scale / standard)
A and C axes 0.001º
Electrical Service
Electrical power Required AC 200/220V 3 phase 50 / 60 HZ 70 KVA
Air Service
Air Service Required 0.4 MPa, 700 Nl / min. (Dry and clean air)
54 PSI @ 25 cfm
Machine Dimensions (Standard machine)
Length (For shipping) 3,205 mm (126")
Length (For shipping) w/ Op Panel 3,510mm (138")
Width (For shipping) 1,350 mm (53") 1,350mm (53")
Height (For shipping) 2,795 mm (110") 2,745mm (108")
Machine Weight 5,800kgs (12,760 lbs)
Floor space
Length 3,250mm (128")
Width 1,350mm (53") (to anchor = 1,540mm)
Numerical Control Equipment
CNC Control FANUC 31i
This website uses cookies to improve your experience on our site. Please review our Privacy Policy and Terms of Use. By using this website, you accept our use of cookies.